Specifications

USB: USB 2.0 Full speed, USB 1.1 compatible

Power consumption: USB – less than 100mA

Power supply – max.1.8A at +13.8V (max. +16V)

CAT: RxD, TxD – max. 57600 Baud, RTS fixed level output max.1mA

Levels: TTL, inverted TTL, open collector bus, RS232

Serial: RS232 levels, RTS fixed level output max.1mA, up to 9600 baud

PA CI-V: open collector bus max.40mA, up to 9600 baud

All relay outputs: 30VDC, 48VAC, max.2A

External PORT A power: max. +24V/1.3A

External PORT B power: max. +24V/1.3A

PS/2 consumption: max. 200mA at +5V

Rotator analog input: 10K ohm, max. +/-12V

Rotator pulse input: active when grounded, max.+24V/5mA

Rotator reference output: 9V, max.20mA

PA Keying output: open collector, max.+45V/800mA

PA Keying input: active when grounded, max.+24V/5mA

PA ON/OFF control: +12V, max.100mA

Dimensions: W 230mm (9") x H 44mm (1.73") x D 160mm (6.3")

Weight: 1.3 kg (1.875 lbs.)

1. POWER

   LED lights when +13.8V is applied (power switch on).

2. ALARM

   LED lights when “ALARM” condition happens, transmission is allowed.

   LED flashes when “ALARM” condition happens, transmission is inhibited.

3. READY

   LED lights when transmission is allowed.

   LED flashes when transmit condition has been changed and will be applied on next transmission cycle.

4. BUSY 

   LED lights when “BUSY” condition happens, transmission is allowed.

   LED flashes when “BUSY” condition happens, transmission is inhibited.

5. FUNC/MENU

   Short press and release opens “Function” list.

   Press and hold for more than one second opens “Menu” list.

6. ENCODER

   Rotary encoder with push button. Function vary on configuration and antenna selection.

7. <-/YES

   Button for browsing between available antennas backward and menu navigation.

8. ->/NO

   Button for browsing between available antennas forward and menus navigation.

1. DC 13.8V

   Power Supply - 2.1 x 5.5 mm coaxial jack, center is positive (+).

2. iLINK

   MiniDIN-6 for connection with microHAM “keyer” or function expansion module.

3. USB 

   USB B connector for computer connection.

   Standard USB A-B cable. 

4. SERIAL

   RS232 level serial port.

   DB9 female jack.

   See Appendix “Connectors” for details.

5. PA

   DB15 female jack for connection with Power Amplifier.

   Compatible with microHAM “CAT” cables

   See Appendix “Connectors” for details.

6. PORT A

   DB25 female jack for antenna switch connection.

   See Appendix “Connectors” for details.

7. PS/2

   MiniDIN6 for PS/2 keyboard or PS/2 keypad.

8. INHIBIT

   Power inhibit output for Yaesu's transceivers.

   RCA jack  TIP - Signal  SHELL - GND 

9. CAT

   4 pole 3.5mm phono jack for transceiver control. Compatible with microHAM “CAT” cables.
   

10. GND 

    Terminal for connection to station ground.

11. iLINK

    MiniDIN-6 for connection with microHAM “keyer” or function expansion module.

12. POWER

    Power Switch.

13. ROTOR

    DB15 female jack for connection with Antenna Rotator.

    See Appendix “Connectors” for details.

14. PORT B

    DB25 female jack for antenna switch, BPF and/or sequencer connection.

    See Appendix “Connectors” for details.

15. PTTIN

    PTT Input for connection with PTT output from transceiver or PAPTT output from microHAM “keyer”. Active when closed to ground.

    RCA jack TIP - Signal   SHELL – GND